Dr Haran Arampamoorthy’s publications and talks:
1) Haran Arampamoorthy and John Patrick, 2011. Comparison of the Wehner – Schulze and PSV test for estimating the polishing resistance of New Zealand chip seal aggregate. 3rd International Surface Friction Conference, Safer Road Surfaces – Saving Lives, Gold Coast, Australia.
2) Haran Arampamoorthy and J Patrick, 2013. Investigation of premature failure dig-out sites in Wellington city council Northern road network. Central Laboratory report. Report No.: 12-521167.00
3) Haran Arampamoorthy and J Patrick, 2012. Wellington City Council Cost comparison of different type of pavement performance. Central Laboratory report. Report No.: 13-521170.00
4) Haran Arampamoorthy and J Patrick, 2012.Recycling of old chip seal road surfaces. Central Laboratory report. Report No.: 12-521135.04
5) Haran Arampamoorthy, 2011. Investigation of passing lane safety benefits, including upstream and downstream areas. Report No.: Draft, NZ Transport Agency, Wellington New Zealand.
6) Haran Arampamoorthy and John E Patrick 2010. FAILURE PROBABILITY OF NEW ZEALAND Thin surfaced granular PAVEMENTS, 24th ARRB Conference – Building on 50 years of road and transport research, Melbourne, Australia
7) H Arampamoorthy and J Patrick, 2011. Potential of the Wehner-Schulze test to predict the on-road friction performance of aggregate. Report No.: 443, NZ Transport Agency, Wellington New Zealand.
8) Haran Arampamoorthy and John E Patrick, 2011. Determination of the distribution of expected highway network pavement lives, Central Laboratory report. Report No.: 05-521010.34
9) Dr Haran Arampamoorthy and John E Patrick 2010. Design Moisture Condition Guidelines for Pavement Design and Material Assessment, Report No.: 424, NZ Transport Agency, Wellington, New Zealand
9 a) Reconsidering moisture levels in NZ pavements
10) JE Patrick, Dr H Arampamoorthy, Dr P Kathirgamanathan and JI Towler 2013. Improvement of the performance of hotmix asphalt surfacings in New Zealand Report No.: 508, NZ Transport Agency, Wellington New Zealand.
11) Haran Arampamoorthy and John E Patrick 2010. Failure probability of New Zealand pavements. Report No.: 421, NZ Transport Agency, Wellington, New Zealand.
12) Haran Arampamoorthy and John E Patrick, 2006. The design of stabilised pavements in New Zealand: Review of Field Performance, Transit New Zealand.
13) Haran Arampamoorthy and John E Patrick, 2008. Determine Whole of Life Cost of Asphalt surface Central Laboratory report. Report No.: 521115.00
14) Haran Arampamoorthy and John E Patrick, 2008. Influence of the compaction and test methods on the strength and modulus of modified granular materials, Central Laboratory report. Report No.: 06-521141.00
15) Moorthy, H., Patrick J.E., 2005. Test procedures for determining the mechanical properties of stabilised granular pavement materials. 7th Annual NZIHT/Transit NZ Conference, Christchurch, New Zealand.
16) John Patrick and Haran Arampamoorthy, 2012. Factors influencing the decision to rehabilitate a pavement. Report No.: 491, NZ Transport Agency, Wellington New Zealand.
17) John Patrick and Haran Arampamoorthy, 2011. Concrete Pavement Skid Resistance as enhanced by Diamond Grinding and Grooving (A Literature Review). Central Laboratory report. Report No.: 05-521010.48.
18) D Alabaster, J Patrick, Haran Arampamoorthy and Dr A Gonzalez 2013. The design of stabilised pavement in New Zealand, Report No.: 498, NZ Transport Agency, Wellington New Zealand.
19) John Patrick, Padmanathan Kathirgamanathan, Shaun Cook, Philip Herrington, Haran Arampamoorthy 2011. Small-scale accelerated pavement testing machine. Road and Transport Research Vol.20 No.3., ARRB group, Australia.
20) John E Patrick and Haran Arampamoorthy, 2008. Quantifying the Benefits of Waste Minimisation in Road Construction, Recycling and Stabilisation Conference, Auckland. New Zealand.
21) John Patrick and Haran Arampamoorthy, 2010. Quantifying the Benefits of Waste Minimisation, Report No.: 406, NZ Transport Agency, Wellington, New Zealand
22) Stephen J. Murray and Haran Arampamoorthy 2009. Evidential Based Guidelines for Temporary Speed Limits, Report No.: 407, Land Transport New Zealand, Wellington, New Zealand.
22 a) How to set safe speed limits at work sites
23) Haran Arampamoorthy and John E Patrick, 2004.Wellington City Council Overweight Permit Check List, Central Laboratory report. Report No.: 04 – 521075.00
24) Arampamoorthy, H., 2005. Analysis of spatial distribution of road accidents. Ph.D. Thesis, Department of civil Engineering, University of Canterbury, Christchurch, New Zealand.
25) Haran Arampamoorthy, 1995. Computer Aided Design of Abutments. Master of Engineering Thesis, Indian Institute of Technology Roorkee, India.
26) Haran Arampamoorthy, 1994. Preliminary Investigation of an Integrated System (power generation, surface irrigation and flood control). Indian Institute of Technology Roorkee, India.
Talks:
1) Haran Arampamoorthy April 2013, “Opus Road Network Drainage Maintenance Survey Output & Hydraulic Model input data developed for identifying moisture condition after rain”. Steering group meeting for the research project “The Impact of Drainage Maintenance on Pavement Performance” funded by NZTA, Opus International Consultant, Tauranga.
2) Haran Arampamoorthy 2010. Is safety assessment important for overtaking lane design?”, Montana State University, Western Transportation Institute, Montana, USA.
3) Haran Arampamoorthy., May 2011. Micro behaviour of granular pavement during construction faces and service time. Engineering & Technology Division, Department of Transport and Main Roads, Brisbane, Australia.
4) Haran Arampamoorthy 2010. Understanding the micro behaviour of granular pavement. Talk. Strength and deformation characteristic of pavement committee (AFD80), TRB’s 90th Annual meeting at Washington, DC.
5) Haran Arampamoorthy 2010a. Minimising long term failure of New Zealand chip seald surfaced granular pavements. North Carolina state University, North Carolina, USA.
6) Haran Arampamoorthy 2010b New Zealand chip seal. North Carolina state University, North Carolina, USA.
7) Haran Arampamoorthy 1994. Udawalawa Irrigation Improvement Project. Indian Institute of Technology Roorke, India.
8) Haran Arampamoorthy 1995. Computer aided design of abutments. Indian Institute of Technology Roorke, India.
9) Haran Arampamoorthy 2005. Modulus of Stabilised Materials for the pavement Design: ’’Mechanistic Design and Evaluation of Pavements – 2006 Workshop Organised by Dr Graham Salt, Auckland.
10)Haran Arampamoorthy, 1995. Stress distribution on vertical face of the retaining structure induced by the different types of loads on back fill. Indian Institute of Technology Roorkee, India.
11) Haran Arampamoorthy. 1994. Rehabilitation Design of Udawalawa Irrigation Improvement project in Srilanka. Indian Institute of Technology Roorkee, India.
12) Haran Arampamoorthy, 2012. Investigation of premature failure dig-out sites in Wellington city council Northern road network. Wellington City Council, Wellington.
Website: http://nz.linkedin.com/pub/haran-arampamoorthy/41/61/476